Yamaha YP250 5GM2-AE1 2000 Service Manual page 28

D Clamp the brake hose assembly.
E Fasten the seat lock cable
throttle cable and wireharness to
the frame with a band, and the
end of band is downward.
F Clamp the switch assembly lead
with a band and cut the end of
band. It's downward.
G Fasten the throttle cable with a
band and more than 10 mm
between throttle cable and box.
H Don't scrub each other when fix
the throttle cables.
CABLE ROUTING
I Throttle cable pull side. (White
nut)
J Throttle cable push side. (Black
and white nut)
K Clamp the fuel hose.
L Route the carburetor coolant
drain hose, carburetor fuel drain
hose through the clamp.
M Route the carburetor drain hose
through the centerstand spring
hook.
N Clamp the sidestand switch
lead.
O Touch the protection tube on the
fuel pump.
18
SPEC
P Fasten the wire harness to the
frame with a band and the end of
band inside.
Q Roll the tape because of fix the
protection tube to the fuel pum
lead.
R Clamp the fuel pump lead and
sidestand switch lead.
S Fasten the throttle cable and the
end of band backward.
T Lubricate the silicone grease
befor fasten the cable and
hoses.