Yamaha YP250 5GM2-AE1 2000 Service Manual page 29

U More than 10 mm.
V Route the seat lock cable
through the footrest board.
W Route the left handlebar switch
lead through front side of the
handlebar under cover.
X Route the right handlebar switch
lead through the clamp.
Y Route the front brake hose
through the right hole of handle-
bar under cover.
Z Route the brake hose assembly
through the left hole of the han-
dlebar under cover.
CABLE ROUTING
A' Fasten the left handlebar switch
lead and rear brake switch lead
to the handlebar with a plastic
locking tie, cut the end of locking
tie at 5 mm or less.
B' Don't catch the seat lock cable
between footrest board and box.
19
SPEC