Pre-Start Inspection - JLG 1930ES Operation And Safety Manual

Pre-Start Inspection

The Pre-Start Inspection should include each of the following:
1. Cleanliness – Check all surfaces for leakage (oil, fuel,
or battery fluid) or foreign objects. Report any leakage
to the proper maintenance personnel.
2. Structure - Inspect the machine structure for dents,
damage, weld or parent metal cracks or other discrep-
ancies.
Parent Metal Crack
3. Decals and Placards – Check all for cleanliness and
legibility. Make sure none of the decals and placards
are missing. Make sure all illegible decals and placards
are cleaned or replaced.
4. Operation and Safety Manuals – Make sure a copy of
the Operator and Safety Manual, AEM Safety Manual
(ANSI markets only), and ANSI Manual of Responsibili-
3121165
SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION & INSPECTION
Weld Crack
– JLG Lift –
ties (ANSI markets only) is enclosed in the weather
resistant storage container.
5. "Walk-Around" Inspection – Refer to Figure 2-1
6. Battery – Charge as required.
7. Fuel (Combustion Engine Powered Machines) – Add
the proper fuel as necessary.
8. Engine Oil Supply (If equipped) - Ensure the engine
oil level is at the full mark on the dipstick and the filler
cap is secure.
9. Fluid Levels – Check the hydraulic oil level. Ensure
hydraulic oil is added as required.
10. Accessories/Attachments - Reference the Operator
and Safety Manual of each attachment or accessory
installed upon the machine for specific inspection,
operation, and maintenance instructions.
11. Function Check – Once the "Walk-Around" Inspection
is complete, perform a functional check of all systems
in an area free of overhead and ground level obstruc-
tions. Refer to Section 4 for more specific operating
instructions.
2-3