Battery Hazards - JLG 1930ES Operation And Safety Manual

SECTION 1 - SAFETY PRECAUTIONS
• Shut down the engine (if equipped) while fuel tanks are
being filled.
• Ensure replacement parts or components are identical or
equivalent to original parts or components.
• Never attempt to move heavy parts without the aid of a
mechanical device. Do not allow heavy objects to rest in an
unstable position. Ensure adequate support is provided
when raising components of the machine.
• Remove all rings, watches, and jewelry when performing
any maintenance. Do not wear loose fitting clothing or long
hair unrestrained which may become caught or entangled
in equipment.
• Use only clean approved non-flammable cleaning solvents.
• Never alter, remove, or substitute any items such as coun-
terweights, tires, batteries, platforms or other items that
may reduce or affect the overall weight or stability of the
machine.
• Reference the Service and Maintenance Manual for the
weights of critical stability items.
MODIFICATION OR ALTERATION OF AN AERIAL WORK PLATFORM SHALL BE
MADE ONLY WITH PRIOR WRITTEN PERMISSION FROM THE MANUFACTURER.
1-10

Battery Hazards

• Always disconnect batteries when servicing electrical com-
ponents or when performing welding on the machine.
• Do not allow smoking, open flame, or sparks near battery
during charging or servicing.
• Do not contact tools or other metal objects across the bat-
tery terminals.
• Always wear hand, eye, and face protection when servicing
batteries. Ensure that battery acid does not come in contact
with skin or clothing.
BATTERY FLUID IS HIGHLY CORROSIVE. AVOID CONTACT WITH SKIN AND
CLOTHING AT ALL TIMES. IMMEDIATELY RINSE ANY CONTACTED AREA WITH
CLEAN WATER AND SEEK MEDICAL ATTENTION.
• Charge batteries only in a well ventilated area.
• Avoid overfilling the battery fluid level. Add distilled water
to batteries only after the batteries are fully charged.
– JLG Lift – 3121165