Lower Slide Pad Channel; Upper Slide Pad Channel - JLG 1930ES Operation And Safety Manual

SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
3. Apply a layer of grease along the inside and bottom of
the lower slide channel (1) on both sides of the machine.
Figure 6-2. Lower Slide Pad Channel
6-14
4. Apply a layer of grease along the inside and top of the
upper slide channel (2) on both sides of the machine.
Refer to Figure 6-3., Upper Slide Pad Channel.
Figure 6-3. Upper Slide Pad Channel
NOTE: Recommended lubricating intervals are based on
machine operations under normal conditions. For
machines used in multi-shift operations and/or exposed
to hostile environments or conditions, lubrication fre-
quencies must be increased accordingly.
– JLG Lift – 3121165