Dv/D8 Dubbing (Dv/D8 Y Dvd) - Sony RDR-VX511 Service Manual

QQ
3 7 63 1515 0
z Hints
• A black (no signal) screen at the end of the dubbed disc
is not a malfunction. This screen is recorded if a time
discrepancy exists between the disc and tape when the
recording is stopped.
• When dubbing a VHS tape to a DVD, the VHS tape
counter value may differ slightly from the DVD
recording time.
• VCR playback sound is output during dubbing.
Notes
• Dubbing cannot be made when:
– using a non-recordable DVD.
– using VHS software with copy guard functions.
• Dubbing stops when:
– the VHS tape reaches the end and stops.
– the VHS video deck or the DVD deck is stopped.
– the disc remaining time runs out.
• The System Menu, TOOLS menu, and information
display are not displayed during dubbing.
• Copyrights
– Recordings made from VHS tapes and other
copyrighted material are solely for individual
enjoyment, and other unauthorized use is prohibited
under copyright law.
– Unauthorized editing of copyrighted material is
prohibited under copyright law.
TE
L 13942296513
5
Select "Program Dubbing," and press
ENTER.
Dubbing 10:10 AM
Title List
Create Dubbing List
Program Dubbing List
Timer
Edit
Dubbing
Disc Setting
Setup
6
Select "Create Dubbing List," and press
ENTER.
If you have performed Program Dubbing
before, the display asks for confirmation. To
continue, select "Yes" and press ENTER.
The display for selecting titles appears.
Create Dubbing List
10:10 AM
1/2 No. Title Length Edit
01 CH 32 00:05:04 >
02 CH 96 00:00:51 >
T
CH 32
May/02/2005
03:25 PM
7
Select the title you want to dub, and press
ENTER.
The sub-menu appears.
To dub the entire title, select "Title Dubbing"
and press ENTER. The Program Dubbing List
appears with the selected title. Go to step 13.
To select a scene to dub, go to step 8.
8
Select "Scene Dubbing," and press
ENTER.
The display for setting a scene appears.
"Start" is selected.
www
Scene Dubbing 10:10 AM
Scene No.01
Start
End
Start 00:00:00
Make
00:00:07
T
.
Dubbing List No. 1
Finish
End 00:00:00
---/--/---- --:--
http://www.xiaoyu163.com
Dubbing From a DVD to a
VHS Tape
+ -RW -RW + - DVD
RW R R
VR
Video
You can record (dub) a DVD title to a VHS tape.
Note that when you record copy-protected
software to a tape, picture may appear disrupted
when you play back the tape.
You can also select titles or scenes and dub them
all at once. See "Dubbing selected titles and scenes
(Program Dubbing)" on page 84.
Before dubbing, make the necessary audio settings
on the DVD recorder.
DVD VIDEO
SUBTITLE
AUDIO
SYSTEM
TITLE LIST
MENU
TOP MENU
M/m/</,,
ENTER
O RETURN
./>
H PLAY
x STOP
X PAUSE
REC MODE
DVD t
1
Press VIDEO and insert a VHS tape with its
safety tab in place.
To select the recording mode, SP or EP, press
REC MODE repeatedly (see page 73).
83
,continued
9
Press ENTER at the start point.
You can use H PLAY,
,
./>, x STOP, and X PAUSE to find
the point.
"End" is selected.
Scene Dubbing 10:10 AM
Scene No.01
Start
End
Start 00:00:10
Make
00:00:10
T
Dubbing List No. 1
Finish
End 00:00:00
---/--/---- --:--
10
Press ENTER at the end point.
"Make" is selected.
To reset the start or end point, select "Start" or
"End" and repeat from step 9 or 10.
11
Press ENTER.
To continue, repeat from step 9.
12
Select "Finish," and press ENTER.
The Program Dubbing List appears with the
selected scene.
Program Dubbing List 10:10 AM
No. Title Length Edit
01 CH 32 00:05:04 >
Addition
Erase
Check
T CH 32
May/02/2005
Dubbing
03:25 PM
13
Select an option and press ENTER, if
necessary.
To add other titles or scenes, select "Addition"
and press ENTER, and repeat from step 7.
To cancel the selected title or scene, select
"Erase" and press ENTER. When asked for
confirmation, select "OK" and press ENTER.
To view the selected title or scene, select
"Check" and press ENTER.
x ao u163
To cancel dubbing, press O RETURN. y
14
Select "Dubbing," and press ENTER.
Dubbing starts.
i
,continued 85
http://www.xiaoyu163.com
2 9
8
2
Insert a source disc.
3
Press DVD to operate the DVD recorder.
4
Press TOP MENU or TITLE LIST to select a
title.
5
Start playing the DVD, and then press x
STOP or X PAUSE at the point where you
want to start dubbing.
To select DVD sound, language, or subtitle,
press AUDIO or SUBTITLE during playback
(see page 33).
6
Press DVD t on the recorder.
Dubbing starts.
To stop dubbing
Press x STOP.
Note that it may take a few seconds for the
recorder to stop dubbing.
To dub using the on-screen menu
1
After step 5 above, press SYSTEM MENU.
2
Select "Dubbing" from the System Menu, and
press ENTER.
Dubbing 10:10 AM
Title List
Simple Dubbing
Program Dubbing
Timer
DV/D8 Dubbing
Edit
Dubbing
Disc Setting
Setup
3
Select "Simple Dubbing," and press ENTER.
Dubbing 10:10 AM
Title List
Simple Dubbing
VIDEO --> DVD
Program Dubbing DVD --> VIDEO
Timer
DV/D8 Dubbing
Edit
Dubbing
Disc Setting
Setup
4
Select "DVD t VIDEO," and press ENTER.
The display asks for confirmation.
5
Select "Yes," and press ENTER.
Dubbing starts.
If the disc's menu appears when DVD
Q Q
playback finishes, press x STOP to stop
3 6 7 1 3
84
To stop dubbing
Press x STOP.
Note that it may take a few seconds for the
recorder to stop dubbing.
z Hints
• The brightness of the playback picture may differ from
normal DVD playback picture.
• The DVD playback time may differ slightly from the
VHS tape counter value.
• The sound being played back (main, sub, etc.) is the
dubbed sound.
Notes
• Dubbing cannot be made when "Progressive" of
"Video" is set to "On" in the "Setup" display.
• Dubbing stops when:
– the DVD is played back to the end and stops.
– the DVD deck or the VHS video deck is stopped.
– the tape remaining time runs out.
• The System Menu, TOOLS menu, and information
display are not displayed during dubbing.
• Copyrights
– Recordings made from discs and other copyrighted
material are solely for individual enjoyment, and
other unauthorized use is prohibited under copyright
law.
– Unauthorized editing of copyrighted material is
prohibited under copyright law.
• Once you eject the disc, the Program Dubbing List is
erased.
.
86
1-20
9 4 2 8
dubbing. Otherwise the disc's menu is
recorded until the tape reaches its end.
z Hints
• The brightness of the playback picture may differ from
normal DVD playback picture.
• The DVD playback time may differ slightly from the
VHS tape counter value.
• The sound being played back (main, sub, etc.) is the
dubbed sound.
Notes
• Dubbing cannot be made when "Progressive" of
"Video" is set to "On" in the "Setup" display.
• Dubbing stops when:
– the DVD is played back to the end and stops.
– the DVD deck or the VHS video deck is stopped.
– the tape remaining time runs out.
• The System Menu, TOOLS menu, and information
display are not displayed during dubbing.
• Copyrights
– Recordings made from discs and other copyrighted
material are solely for individual enjoyment, and
other unauthorized use is prohibited under copyright
law.
– Unauthorized editing of copyrighted material is
prohibited under copyright law.
Dubbing selected titles and scenes
(Program Dubbing)
You can select titles or scenes from a DVD, and
dub the contents to a VHS tape all at once.
1
Press VIDEO and insert a VHS tape with its
safety tab in place.
To select the recording mode, SP or EP, press
REC MODE repeatedly (see page 73).
2
Press DVD and insert a source disc.
To select DVD sound, language, or subtitle,
press AUDIO or SUBTITLE during playback
(see page 33).
3
Press SYSTEM MENU.
The System Menu appears.
4
Select "Dubbing," and press ENTER.
Dubbing 10:10 AM
Title List
Simple Dubbing
Program Dubbing
Timer
DV/D8 Dubbing
Edit
Dubbing
Disc Setting
1 5 0 5 8 2 9 9 4
Setup
Finalizing a Disc (Preparing
a Disc for Playback on
Other Equipment)
+ -RW -RW + -
RW R R
VR
Video
Finalizing is necessary in order to play discs
recorded with this recorder on other DVD
equipment.
When you finalize a DVD+RW/DVD-RW (Video
mode)/DVD+R/DVD-R, a DVD menu will be
automatically created, which can be displayed on
other DVD equipment.
Before finalizing, check the differences between
the disc types in the table below.
Differences between the disc types
Discs are automatically finalized when
+ RW
removed from the recorder. If you want
to record on it again, reformat the disc
(page 66). Note however, that
reformatting a disc erases all its
contents.
Finalizing is unnecessary when playing a
-RW
VR
disc on VR format compatible equipment.
Even if your other DVD equipment is
VR format compatible, you may need to
finalize the disc, especially if the
recording time is short. After finalizing,
you cannot edit or record on the disc. If
you want to edit or record on it again,
unfinalize or reformat the disc (page 66).
Note however, that reformatting a disc
erases all its contents.
Finalizing is necessary in order to play
-RW
Video
on equipment other than this recorder.
After finalizing, you cannot edit or
record on the disc. If you want to edit or
record on it again, unfinalize or reformat
the disc (page 66). Note however, that
m
reformatting a disc erases all its
contents.
Finalizing is necessary in order to play
+ R
on equipment other than this recorder.
co
- R
After finalizing, you cannot further edit
or record on the disc.
9 9
2 8 9 9