Sony RDR-VX511 Service Manual page 13

QQ
3 7 63 1515 0
Step 3: Connecting to Your TV
Connect the supplied audio/video cord to the LINE OUT (AUDIO L/R/VIDEO) jacks of the recorder.
To enjoy higher quality images, connect an S video cord (not supplied) instead of the yellow (video) plug.
When using this connection, be sure to connect the audio cord to the LINE OUT (AUDIO L/R) jacks.
INPUT
S VIDEO
S video cord
(not supplied)
to S VIDEO OUT
VCR-DVD recorder
: Signal flow
When playing "wide screen" images
Some recorded images may not fit your TV screen. To change the picture size, see page 95.
Notes
• Do not connect more than one type of video cord between the recorder and your TV at the same time.
• During DVD recording, you cannot watch VHS pictures by pressing VIDEO, as the S VIDEO OUT jack will output
DVD video signals only.
• Do not connect your TV's audio output jacks to the LINE IN (AUDIO L/R) jacks at the same time. This will cause
unwanted noise to come from your TV's speakers.
TE
L 13942296513
Step 4: Connecting to Your AV Amplifier (Receiver)
Select one of the following patterns A or B, according to the input jack on your AV amplifier (receiver).
This will enable you to listen to DVD audio tracks through your AV amplifier (receiver).
AUDIO OUT
L
R
VCR-DVD recorder
DIGITAL AUDIO OUT
OPTICAL COAXIAL
Optical digital cord (not supplied)
[Speakers]
Rear (L)
Front (L)
Center
: Signal flow
www
.
http://www.xiaoyu163.com
INPUT
TV or projector
AUDIO
R L VIDEO
(red) (white) (yellow)
S VIDEO OUT LINE 1 IN LINE OUT
(yellow)
VIDEO VIDEO
L
(white)
R
(red)
AUDIO AUDIO
to LINE OUT (VIDEO/AUDIO L/R)
COMPONENT
AUDIO OUT S VIDEO OUT LINE 1 IN LINE OUT VHF/UHF
VIDEO OUT
VIDEO VIDEO
L Y IN
L
R P B
DIGITAL AUDIO OUT
P R
R
OUT
OPTICAL COAXIAL AUDIO AUDIO
Audio cord
INPUT
(white) (white)
(not supplied)
L
AUDIO
R
(red) (red)
AV amplifier (receiver)
to AUDIO OUT (L/R)
COMPONENT
AUDIO OUT S VIDEO OUT LINE 1 IN LINE OUT VHF/UHF
VIDEO OUT
VIDEO VIDEO
L Y IN
L
R P
B
DIGITAL AUDIO OUT
P R
R
OUT
OPTICAL COAXIAL AUDIO AUDIO
to DIGITAL AUDIO OUT
(COAXIAL or OPTICAL)
or
Coaxial digital cord
(not supplied)
to optical to coaxial
[Speakers]
digital input digital input
Rear (R)
Front (R)
AV amplifier (receiver)
with a decoder
Subwoofer
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
If your TV has component video input jacks
Connect the COMPONENT VIDEO OUT jacks using a component video cord (not supplied) or three
video cords (not supplied) of the same kind and length. You will enjoy accurate color reproduction and
high quality images.
If your TV accepts progressive 480p format signals, you must use this connection and then set
"Progressive" of "Video" to "On" in the "Setup" display (page 96). The PROGRESSIVE indicator lights
up when the recorder outputs progressive signals.
When using this connection, be sure to connect the audio cord to the LINE OUT (AUDIO L/R) jacks.
COMPONENT VIDEO IN
(green) (blue)
Audio/video cord
(supplied)
z Hint
Video signal can also be output from the COMPONENT VIDEO OUT jack when playing a VHS tape.
Note
During DVD recording, you cannot watch VHS pictures by pressing VIDEO, as the COMPONENT VIDEO OUT jacks
Q Q
will output DVD video signals only.
3 6 7 1 3
,continued 15 16
A Connecting to audio L/R jacks
This connection uses a stereo amplifier's
(receiver's) two front speakers for sound.
You can enjoy the surround function that creates
virtual speakers from two stereo speakers. Select
from "Surround1," "Surround2," or "Surround3"
of the surround effects (page 33).
Surround 1
A
Surround 2
Surround 3
B
Virtual speaker
B Connecting to a digital audio input jack
Use this connection if your AV amplifier
(receiver) has a Dolby
and a digital input jack. You can enjoy the
surround effect of Dolby Digital (5.1ch) or DTS
(5.1ch).
.
*1
Manufactured under license from Dolby Laboratories.
"Dolby," "Pro Logic," and the double-D symbol are
trademarks of Dolby Laboratories.
,continued 17 18
1-3
9 4 2 8
INPUT
TV or projector
AUDIO
L R
Y P P
B R
(red) (white) (red)
Component video cord
(not supplied)
COMPONENT
LINE OUT
VIDEO OUT
(green)
VIDEO
Y
(blue)
L
P B
(red)
P
R
R
AUDIO to LINE OUT (AUDIO L/R)
to COMPONENT VIDEO OUT
AUDIO OUT COMPONENT S VIDEO OUT LINE 1 IN LINE OUT VHF/UHF
VIDEO OUT
VIDEO VIDEO
L Y IN
L
R P B
DIGITAL AUDIO OUT
P R
R
OUT
OPTICAL COAXIAL AUDIO AUDIO
VCR-DVD recorder
: Signal flow
1 5 0 5 8 2 9 9 4
*2 "DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, Inc.
z Hints
• For correct speaker location, see the operating
instructions supplied with the connected components.
• During VHS playback, the DIGITAL AUDIO OUT
jacks can also output digital audio signals.
Notes
• During DVD recording, the DIGITAL AUDIO OUT
jacks output DVD audio signals only. You cannot hear
VHS sound by pressing VIDEO.
• After you have completed the connection, make the
appropriate settings under "Audio Connection Setup"
in Easy Setup (page 22). Otherwise, no sound or a loud
noise will come from your speakers.
• With a coaxial or optical digital connection, you cannot
use the virtual surround effects of this recorder.
• The recorder cannot play Linear PCM soundtracks of 2
channels or more.
• When outputting from the DIGITAL AUDIO OUT
jacks, you cannot switch the bilingual sounds on a
DVD-RW (VR mode) by pressing AUDIO.
*1 *2
Digital or DTS decoder
m
co
9 9
Audio/video cord (supplied)
(white)
(red)
2 8 9 9