Sony RDR-VX511 Service Manual page 21

QQ
3 7 63 1515 0
5
Press REC MODE repeatedly to select the
recording mode.
The display changes on the TV screen as
follows:
HQ HSP SP
SEP SLP EP
For details about the recording mode, see
page 45.
6
Press z REC.
Recording starts.
Recording continues until you stop the
recording or the disc is full.
To stop recording
Press x STOP.
Note that it may take a few seconds for the
recorder to stop recording.
To pause recording
Press X PAUSE.
To restart recording, press X PAUSE again.
To watch another TV program while recording
1
Slide the TV/DVD·VIDEO switch to TV.
2
Press TV/VIDEO to set the TV to the TV
input.
3
Select another channel on the TV.
To watch a VHS tape while recording
Press VIDEO to operate the VCR, insert a tape,
then press H PLAY.
z Hints
• To play a disc recorded with this recorder on other
equipment, finalize the disc (page 86).
• You can use the number buttons for channel selection.
Enter the channel number, and press SET.
• You can select a video source from the LINE 1 IN or
LINE 2 IN jacks using the INPUT SELECT button.
• You can turn off the TV during recording. If you are
using a cable box or a satellite receiver, make sure to
leave it on.
Notes
• Recording may not start immediately after
pressed.
TE
L 13942296513 • You cannot change the recording mode during
recording or recording pause.
• If there is a power failure, the program you are
recording may be erased.
3
Press Z OPEN/CLOSE to close the disc
tray.
Wait until "LOAD" disappears from the front
panel display.
Unused DVD-RWs are formatted in VR mode
automatically. To format in Video mode, see
page 100.
4
Press TIMER.
Timer – Standard
No Rec To Date Start End
No.1
01 DVD 04/15 09:00PM 10:00PM
02 DVD 04/30 09:15PM 09:45PM
RecTo Date Start Stop
03 --- --/-- --:-- --:--
: :
DVD Today 09 00 PM 10 00 PM
04 --- --/-- --:-- --:--
05 --- --/-- --:-- --:--
06 --- --/-- --:-- --:--
1 2 3 4
5
Select an item using </, and adjust
using M/m.
A "RecTo": Select "DVD."
B "Date": Sets the date using M.
To record the same program every day or
the same day every week, press m.
The item changes as follows:
Today y Sun-Sat (Sunday to Saturday)
y Mon-Sat (Monday to Saturday) y
Mon-Fri (Monday to Friday) y Sun
(every Sunday) y Mon (every Monday)
y ... y Sat (every Saturday) y
1 month later y ... y Today
C "Start": Sets the start time.
D "Stop": Sets the stop time.
E "CH": Selects the channel or input
source.
F "Mode": Selects the recording mode
(page 45).
www
To use the Rec Mode Adjust function
(page 49), select "AUTO."
If you make a mistake, select the item and
change the setting.
.
http://www.xiaoyu163.com
• You cannot change the channel or input source during
recording.
Recording using the Quick Timer
(One-touch Timer Recording)
LSP
You can set the recorder to record in 30-minute
LP
increments.
1
Press DVD to oparate the DVD recorder.
2
Press z REC repeatedly to set the
duration.
Each press increases the time by 30 minutes,
up to eight hours (12 hours for DVD+R DL
(Double Layer) discs).
0:30 1:00 7:30 8:00
"c" and "OTR" light up, and the remaining
recording time appears in the front panel
display.
When the counter reaches "0:00," the recorder
stops recording and turns off.
To cancel the Quick Timer
Press z REC repeatedly until the counter appears
in the front panel display. The recorder returns to
normal recording mode.
To stop recording.
Press x STOP twice.
Note that it may take a few seconds for the
recorder to stop recording.
Checking the disc status while
recording
You can check the recording information such as
recording time or disc type.
Press DISPLAY during recording.
The information display appears.
Press the button repeatedly to change the display
(page 43).
z
REC is
6
Press ENTER.
The Timer List menu (page 52) appears.
The c indicator lights up in the front panel
display, and the recorder is ready to start
recording.
If the c indicator flashes in the front panel
display, check that a recordable disc is
inserted and that there is enough disc space for
the recording.
There is no need to turn off the recorder before
10:10 AM
the timer recording starts.
Source Mode Edit
If timer settings overlap, a message appears.
CH8
To change or cancel a timer recording, select
CH11
CH Mode
"Edit" from the Timer List (page 52).
---- ---
CH 8 SP
7
---- ---
Press SYSTEM MENU to turn off the menu.
---- ---
---- ---
To stop recording
5 6
Press x STOP twice.
Note that it may take a few seconds for the
recorder to stop recording.
If timer settings overlap
The program that starts first has priority and the
second program starts recording only after the first
program has finished. If the programs start at the
same time, the program listed first in the menu has
priority. If the end time of one setting and the start
time of another timer setting is the same, the
beginning of the program that starts later will be
cut.
7:00 8:00 9:00
Program 1
Program 2
will be cut off
7:00 8:00 9:00
Program 1
Program 2
will be cut off
x ao
y
To change or cancel timer recording
See "Changing or Canceling DVD Timer Settings
(Timer List)" on page 52.
i
To use the Rec Mode Adjust function
If the remainning disc space is not enough for the
current recording, the recorder automatically
http://www.xiaoyu163.com
8
Record
0:00:03
HQ
Rem 02:28
CH 1
A Disc type
B Recording status
C Recording time
D Recording mode
(normal
E Remaining disc space
recording)
F Channel or input source
z Hint
You can view the information also in the front panel
display. Press TIME/TEXT repeatedly to change the
display. Note that TIME/TEXT does not work during
One-touch Timer Recording.
Creating chapters in a title
The recorder will automatically divide a recording
(a title) into chapters by inserting chapter marks at
5 or 15-minute intervals during recording. Select
the interval, "5 Min" (default) or "15 Min" in
"DVD Auto Chapter" of "Features" in the "Setup"
display (page 99).
If you do not want to divide titles, select "Off."
z Hint
You can create chapters manually when playing
DVD+RWs or DVD-RWs (VR mode) (page 59).
Q Q
3 6 7 1 3
,continued 47 48
adjusts the recording mode. Select "AUTO" for
"Mode" when setting the timer.
z Hints
• You can play the recorded program by selecting the
program title in the Title List menu.
• When the start time and the channel or input source to
be recorded are the same but the "RecTo" setting
differs, the program is recorded to both the DVD disc
and the VHS tape.
• You can also turn on the timer programming menu
from the System Menu. Press SYSTEM MENU to
select "Timer," and select "Timer-Standard."
Notes
• To record a cable or satellite program, turn on the cable
box or satellite receiver and select the program you
want to record. Leave the cable box or satellite receiver
turned on until the recorder finishes recording.
• Even when correctly set, the program may not be
recorded if another recording is underway, or other
prioritized timer setting overlaps.
• Before the timer recording starts, "TIMER REC"
flashes in the front panel display.
• The recorder automatically turns off when a timer
recording finishes, even if the recording started with
the recorder turned on.
• The recorder does not record programs with Copy-
Never signals. Such recordings stop after a few
seconds.
10:00
10:00
u163
.
,continued 49 50
1-11
2 9 9 4 2 8
DVD Timer Recording
+ RW -RW -RW
VR
You can set the timer for a total of 12 programs
together with DVD and VCR timer recording, up
to one month in advance.
Note that the maximum continuous recording time
for a single title is 12 hours. Contents beyond this
time will not be recorded.
Follow the steps below to set each timer recording
item.
Note
Do not operate your cable box or satellite receiver just
before or during a timer recording. This may prevent the
accurate recording of a program.
Z OPEN/
CLOSE
DVD
SYSTEM
MENU
1
Press DVD to operate the DVD recorder.
2
Press Z OPEN/CLOSE, and place a
recordable disc on the disc tray.
1 5 0 5 8 2 9 9 4
Recording side facing down
Recording From Connected
Equipment With a Timer
(Synchro Rec)
+ RW -RW -RW
VR
You can set the recorder to automatically record
programs from connected equipment that has a
timer function (such as a satellite tuner). Connect
the equipment to the LINE 1 IN jacks on the rear
of the recorder (page 27).
When the connected equipment turns on, the
recorder starts recording a program from the LINE
1 IN jacks.
DVD
SYSTEM
MENU
REC MODE
SYNCHRO
REC
1
Press DVD to operate the DVD recorder.
2
Insert a recordable disc.
m
3
Select the line input audio.
Set "Line Audio Input" of "Audio" to
"Stereo" or "Main/Sub" in the "Setup"
co
display (page 99).
9 9
+ R - R
Video
TIMER
M/m/</,,
ENTER
x STOP
2 8 9 9
+ R - R
Video
M/m/</,,
ENTER
x STOP