Sony RDR-VX511 Service Manual page 15

QQ
3 7 63 1515 0
7
Select whether or not you have a cable
connection.
Easy Setup
No Disc
Select the way in which you will receive
channels.
Antenna
Cable
If you use an antenna only (no cable TV),
select "Antenna."
For all other connections, select "Cable."
8
Press ENTER.
The Tuner Preset function automatically starts
searching for all of the receivable channels
and presets them.
Easy Setup
No Disc
Searching for receivable channels. 25
Please wait.
To set the channels manually, see page 94.
After the Tuner Preset is finished, the setup
display for selecting the picture size of the
connected TV appears.
9
Select the setting that matches your TV
type.
Easy Setup
No Disc
Select your TV screen type.
16 : 9
4 : 3 Letter Box
4 : 3 Pan Scan
TE
L 13942296513
4
Select "Command Mode," and press
ENTER.
Options
No Disc
Title List
Language
Parental
Timer
Front Display : Auto
Edit
Command Mode : DVD1 No
Dubbing
Factory Setting
Disc Setting
Setup
5
Select the command mode ("DVD 1,"
"DVD 2," or "DVD 3"), and press ENTER.
6
Slide the COMMAND MODE switch on the
remote so it matches the mode you
selected above.
To return to the previous display
Press O RETURN.
Note
If the command mode does not match, the recorder's
command mode appears on the front panel display when
you operate the remote. Set the remote's command mode
to one that matches the recorder's.
www
.
http://www.xiaoyu163.com
"4:3 Letter Box": For standard TVs.
Displays "wide screen" pictures with bands
on the upper and lower sections of the screen.
"4:3 Pan Scan": For standard TVs.
Automatically displays "wide screen"
pictures on the entire screen and cuts off the
sections that do not fit.
"16:9": For wide-screen TVs or standard TVs
with a wide screen mode.
For details, see "Video Settings (Video)" on
page 95.
10
Press ENTER.
The setup display for selecting the type of
Dolby Digital signal appears.
Easy Setup
No Disc
Dolby Digital
D-PCM
Dolby Digital
11
Select the type of Dolby Digital signal you
want to send to your amplifier (receiver).
If your AV amplifier (receiver) has a Dolby
Digital decoder, select "Dolby Digital."
Otherwise, select "D-PCM."
12
Press ENTER.
The setup display for selecting the type of
DTS signal appears.
Easy Setup
No Disc
DTS
10:10 AM
On
Off
13
Select whether or not you want to send a
DTS signal to your amplifier (receiver),
and press ENTER.
If your AV amplifier (receiver) has a DTS
decoder, select "On." Otherwise, select "Off."
10:10 AM
DVD 1
DVD 2
DVD 3
x ao
y
i
http://www.xiaoyu163.com
8
14
Press ENTER when "Finish" appears.
Easy Setup is finished. All connections and
setup operations are complete.
Easy Setup
No Disc
Easy Setup is finished.
To return to the previous display
10:10 AM
Press O RETURN.
z Hint
If you want to run Easy Setup again, select "Easy Setup"
in the "Setup" display (page 102).
Note
To record TV programs using the timer, you must set the
clock accurately.
If you have a Sony DVD player or
more than one Sony DVD recorder
If the supplied remote interferes with your other
Sony DVD recorder or player, set the command
mode number for this recorder and the supplied
remote to one that differs from the other Sony
DVD recorder or player.
10:10 AM
The default command mode setting for this
recorder and the supplied remote is DVD 3.
Q Q
3 6 7 1 3
,continued 23 24
Connecting Another VCR or Similar Device
After disconnecting the recorder's power cord from an AC outlet, connect the other VCR or similar
recording device to the LINE IN jacks of this recorder. See also the instruction manual supplied with the
connected equipment.
To record on this recorder, see "Recording From Connected Equipment With a Timer (Synchro Rec)" on
page 50 and page 78. Connect the equipment to the LINE 1 IN jacks of the recorder to record using the
Synchro Rec function.
Connecting to the LINE 2 IN jacks on the front panel
Connect other VCR or similar device to the LINE 2 IN jacks of this recorder. If the equipment has an
S video jack, you can use an S video cord (not supplied) instead of the yellow (video) plug of the audio/
video cord.
You can connect a second DVD player and record DVDs.
u163
Notes
.
• You cannot dub a copy guard DVD VIDEO to this DVD recorder.
• Do not connect the yellow LINE IN (VIDEO) jack when using an S video cord.
25 26
1-5
2 9 9 4 2 8
10:10 AM
Finish
SYSTEM
MENU
O RETURN
1
Press SYSTEM MENU.
The System Menu appears.
2
Select "Setup," and press ENTER.
Setup
No Disc
Title List
Tuner Preset
Clock Set
Timer
Video
Edit
Audio
Dubbing
Features
Disc Setting
Options
Easy Setup
Setup
3
Select "Options," and press ENTER.
Options
No Disc
Title List
Language
Parental
Timer
Front Display
Edit
Command Mode
Dubbing
Factory Setting
Disc Setting
Setup
1 5 0 5 8 2 9 9 4
Other VCR, etc.
OUTPUT
VIDEO AUDIO
S VIDEO
L R
S video cord Audio/video cord
(not supplied) (not supplied)
LINE 2 IN
S VIDEO VIDEO L AUDIO R DV IN
(MONO)
to LINE 2 IN
VCR-DVD recorder
m
co
: Signal flow
9 9
M/m/</,,
ENTER
COMMAND
MODE switch
10:10 AM
10:10 AM
: Auto
: DVD 3
2 8 9 9