Clarion db325 Owner's Manual page 13

Hide thumbs Also See for db325:
Table of Contents

Advertisement

Recalling ISR
Press the ISR button
[11]
then the display will
show "ISR", then the radio station previously
memorized will be selected. Press the ISR but-
ton
[1]
again to disengage the unit from the
Recalling ISR function.
CD Mode Operations
Loading
a
Disc
Insert the disc into the CD insertion slot with its
label side up, then the CD will start playing.
For 5-ineh
(12
em) CD
For 3-lneh
(8
em) single CD
FM
I
,
Initial Setting New Setting
(U.S.
standard) (outside
U.S.)
(
..,~_r
()_! !._j /'(. f:::::; )
'" Press the DISP button [I], then the display will show
the play time.
Listening
to
the Disc already Inserted
Press the FUNC button
rn
to select the CD
mode, the CD will start playing.
Ejecting the CD
Press the Eject button
lli],
then the CD will be
ejected.
Note:
• If the ejected CD is lelt
as
it is, it will be reloaded after
15 seconds. However, single CDs will not be
reloaded, so make sure to remove them.
*
When inserting a single CD (3 "(8 em)), insert it from
the center of the slot.
'" When inserting a single CD
(3 "(8
em)), do not con-
nect an adapter.
Notes:
• Some CDs recorded in CD-R/CD-RW mode may not
be usable.
Stopping (pausing) Playback
Press the Play/Pause button
1illI.
-
Press the Play/Pause button
IillI
again to resume
playback.
87.9 to
87.5 to
107.9 MHz
I
108 MHz
10 kHz
9 kHz
AM
531 to
1,629 kHz
Frequency
200 kHz
50 kHz
spacing
Inside U.S. standard (Initial Setting)
While pressing the BAND button
l4l,
press the
SRCH Right button
[l],
then the "U.S standard"
will be selected.
Switching the area change
Outside U.S. (New Setting)
While pressing the BAND button
l4J,
press the
SRCH Left button
rn,
then "outside U.S." will be
selected.
Area Change
Use this function when you are using the car
stereo anywhere outside the U.S.
Switchable frequency spacing
This car stereo is initially set to tune in frequen-
cy intervals of 10kHz for AM and 200 kHz for
FM, the standard calibrations in the U.S. When
using the unit outside the U.S., use the following
procedure to switch the frequency range.
The table below lists the frequency specifica-
tions for the U.S. and other countries.
08325
13

Advertisement

Table of Contents
loading

Table of Contents