Table of Contents
Advertisement
Tuning
As with all analog instruments, the minilogue's circuitry can drift over time
during performance due to changes in environment and temperature. The
minilogue provides an auto-tuning function that automatically tunes the in-
strument's analog circuits on demand, to correct for any analog drift..
As you continue to play the minilogue for a while right after you've turned it
on, the pitch and tone may gradually drift. If the pitch drift becomes notice-
able, use the steps below to tune the instrument. This will manually bring the
minilogue back into tune.
1.
Press the REC button while holding down the SHIFT button.
Tuning will begin, and the display will indicate "Tuning...".
The tuning will take about 15 seconds.
During tuning, you will temporarily be unable to play the minilogue.
Restoring the Factory settings
You can restore the minilogue's preset Programs and global settings to their
original factory-set state at any time.
1.
Begin with the minilogue turned Off.
2.
While holding down the WRITE button and the EXIT button, turn the
minilogue On.
"FACTORY RESET" will be indicated in the display.
3.
Turn the PROGRAM/VALUE knob to select the items you wish to reset
to the factory default settings.
PRESET: Restores the preset Programs (Programs 1–100) to their factory-set
default settings.
This will replace the existing preset Programs with the factory-set
default Programs. If you want to keep the existing preset Programs
beforehand, press the WRITE button to save the presets to the user
Programs (Programs 101–200).
Other functions
47
Hide quick links:
Advertisement
Table of Contents
