Table of Contents
Advertisement
Button 7 (GLOBAL 7)
These parameters allow you to perform a dump of all the internal data, either
via MIDI or via USB.
All Dump (USB)
Turn the PROGRAM/VALUE knob until "Press WRITE" is indicated in the dis-
play. The WRITE button will blink.
Press the WRITE button to transmit the MIDI data dump via the USB B connec-
tor. The display will indicate the message "Transmitting". The data will take
about 10 seconds to transmit.
If the USB cable is not connected, or if the MIDI IN port on the PC is
not open, the data will not be transmitted.
All Dump (MIDI)
Turn the PROGRAM/VALUE knob until "Press WRITE" is indicated in the dis-
play. The WRITE button will blink.
Press the WRITE button to transmit the MIDI data dump via the MIDI OUT
connector. The display will indicate the message "Transmitting". The data will
take about 30 seconds to transmit.
46
Hide quick links:
Advertisement
Table of Contents
