Korg minilogue Owner's Manual page 38

Default Gate Time
The Gate Time is the default value used for each step recorded using the Step
Sequencer. Lower values are more staccato, higher values have a longer gate
time.
Button 3 (SEQ CLEAR)
This function provides a convenient way to erase all data within a specific se-
quence.
All Clear
When using All Clear, all notes and Motion Sequences contained within the
sequence data will be deleted.
Turn the PROGRAM/VALUE knob until "Press WRITE" is indicated in the dis-
play. The WRITE button will blink.
Press the WRITE button to delete the data. The display will indicate the mes-
sage "All Cleared".
Motion Clear
With Motion Clear, only the Motion Sequences contained within the sequence
data will be deleted.
Turn the PROGRAM/VALUE knob until "Press WRITE" is indicated in the dis-
play. The WRITE button will blink.
Press the WRITE button to delete all of the Motion Sequence data. The display
will indicate the message "Motion Cleared".
Button 4 (MOTION CLEAR)
MOTION CLEAR
Unlike the previous motion clear, Button 4 allows you to clear motions 1–4 in-
dividually.
Press button 4 to select the Motion Sequence to delete.
Turn the PROGRAM/VALUE knob until "CLEAR...?" is indicated in the dis-
play. The WRITE button will blink.
Press the WRITE button to delete the data. The display will indicate the mes-
sage "Cleared".
While the SHIFT button is pressed, the MOTION VIEW screen will
TIP
be displayed, where you can see the waveforms for the Motion Se-
quences you have recorded. This will not be displayed if a Motion
Sequence has not been recorded yet.
[0–100%]
38