Korg minilogue Owner's Manual page 32

4.
After you have configured the parameters in PROGRAM EDIT mode
and/or SEQ EDIT mode, press the WRITE button to save your changes.
The display will indicate the message "Where to write?".
If you do not save your changes and select another Program after you
have configured the parameters in the PROGRAM EDIT mode and
the SEQ EDIT mode, your settings will be lost.
GLOBAL EDIT mode parameters are automatically saved when you
TIP
switch pages, so there is no need to save them manually.
5.
Use the PROGRAM/VALUE knob to select the destination Program num-
ber where you will save your edited sound.
Press the EXIT button to cancel the save operation and return to Play mode.
6.
Press the WRITE button to save the settings and return to the Play mode.
32