Korg minilogue Owner's Manual page 28

Deleting a Motion Sequence
If you try to record a fifth Motion Sequence, the message "Motion Full" will be
indicated in the display. When this happens, the display will enter MOTION
CLEAR in the SEQ EDIT mode, and you will be able to delete one of the previ-
ously recorded Motion Sequences.
1.
Check that the minilogue is on the MOTION CLEAR function, in the
SEQ EDIT mode.
"MOTION CLEAR" will be indicated in the display. You can delete Motion
Sequences one at a time here.
Press the EXIT button to cancel deleting the Motion Sequence.
TIP
2.
Press button 4, and select the motion to delete.
3.
Turn the PROGRAM/VALUE knob to select
the message "CLEAR...?".
4.
Press the WRITE button.
The selected Motion Sequence will be deleted.
5.
Press the EXIT button.
6.
To continue recording a Motion Sequence, press the REC button, and
press the PLAY button to stop.
To delete all Motion Sequences at once, use the "Motion Clear" func-
TIP
tion assigned to button 3 in the SEQ EDIT mode. For details, refer to
"Motion Clear" (p. 38).
28
3
4
2