Tire And Loading Information Label; Steps For Determining Correct Load Limit - Hummer 2006 H3 Owner's Manual

Tire and Loading Information Label

Label Example
A vehicle specific Tire and Loading Information is
attached to the vehicle's center pillar (B-pillar). With the
driver's door open, you will find the label attached
below the door latch post. The tire and loading
information label shows the number of occupant seating
positions (A), and the maximum vehicle capacity
weight (B) in kilograms and pounds.
The Tire and Loading Information label also shows the
size of your vehicle's original equipment tires (C)
and the recommended cold tire inflation pressures (D).
For more information on tires and inflation see Tires
on page 5-53 and Inflation - Tire Pressure on page 5-60.
There is also important information on the
Certification/Tire label. It tells you the Gross Vehicle
Weight Rating (GVWR) and the Gross Axle Weight
Rating (GAWR) for the front and rear axles. See
"Certification/Tire Label" later in this section.

Steps for Determining Correct Load Limit

1. Locate the statement "The combined weight
of occupants and cargo should never exceed
XXX kg or XXX pounds" on your vehicle's placard.
2. Determine the combined weight of the driver and
passengers that will be riding in your vehicle.
3. Subtract the combined weight of the driver and
passengers from XXX kilograms or XXX pounds.
4-53