Fuel Cap; Low Fuel - Hummer 2006 H3 Owner's Manual

FLUID
This message will be displayed if the brake fluid is low.
Check the brake fluid as soon as possible and have
your vehicle serviced by your GM dealer. See Brakes on
page 5-36 for more information. Press and release
the reset stem to acknowledge the message and clear it
from the DIC display.

FUEL CAP

This message will be displayed if the vehicle's fuel cap
is either off or loose. You should pull over and check
to see if your vehicle's fuel cap is secure as soon
as possible. You may also see the check engine light
on the instrument panel cluster. If the check engine light
does come on when your vehicle's fuel cap was
loose, it may take a few driving trips before the light
turns off. See Malfunction Indicator Lamp on page 3-35
for more information if the light still remains on. Press
and release the reset stem to acknowledge the message
and clear it from the display.

LOW FUEL

This message will be displayed if the level of fuel in the
vehicle is low. You should also check the fuel gage.
See Fuel Gage on page 3-40 for more information. You
should fill your vehicle's fuel tank as soon as possible.
3-46
LOW TIRE
This message will be displayed if a low tire pressure is
detected in any of the vehicle's tires. Press and
release the reset stem to acknowledge the message
and clear it from the display. The message will appear at
each ignition cycle until the tires are inflated to the
correct inflation pressure. See Tires on page 5-53 and
Inflation - Tire Pressure on page 5-60 for more
information on tires and the correct inflation pressures.
OIL
This message will be displayed when the oil pressure is
low. See Oil Pressure Light on page 3-38 and Engine
Oil on page 5-13 for more information.
PARK BRK (Brake)
This message will be displayed when the parking brake
is set. See Parking Brake on page 2-27 and Brake
System Warning Light on page 3-32 for more
information. The message will clear from the display
after the parking brake is released.
REDUCED POWER
This message will be displayed when the vehicle's
engine power is reduced. Press and release the reset
stem to acknowledge the message and clear it from
the display.