Using The Konftel With A Computer; Connection To A Computer - Konftel 55Wx User Manual

USING THE KONFTEL WITH A COMPUTER

The Konftel 55Wx transforms your computer to teleconferencing equipment with
OmniSound . Unlike normal computer speakers and microphones, the Konftel 55Wx
®
provides full duplex (two-way audio) and efficient echo cancellation and noise reduction.
The computer identifies the Konftel 55Wx as an echo cancellation device which means
that communication software usually leaves the audio processing to the Konftel 55Wx,
resulting in better sound quality. This can also be manually adjusted, for example in
Skype .
®
 OmniSound performs over the full audio bandwidth (100–24000 Hz), but depending
®
on the equipment in the network and equipment used by the other call participants,
there may be some factors that limit the sound quality.

CONNECTION TO A COMPUTER

Connect the computer to the Konftel 55Wx using the USB cable provided.

The button is displayed on the Konftel 55Wx. The button is immediately activated on connec-
tion.
 The computer's operating system normally automatically selects the Konftel 55Wx
as a speaker and microphone. If the Konftel 55Wx is not automatically selected as
an audio device in the computer, you may have to open the computer's settings and
select Konftel 55Wx.
If you have an active software program in the computer that is using the computer's

built-in speakers, it may be necessary to restart the program to switch to the new
speaker (Konftel 55Wx).
11