Multitech MultiModem II MT5600BA-V92 User Manual page 21

Setting Country/Region Codes Trunk
Status
Basic Options
Advanced
Options
Remote Config
Diagnostics
Phone Number
Memory
Caller ID
Region Select
Multi-Tech Systems, Inc. MT5600BA-V92 User Guide
1. Start at the Status LCD and use the down arrow to
move down the menu tree to the Region Select LCD.
2. Use the right arrow to move from the Region Select
LCD, across the Region Setting Options LCD, to the
Current Setting LCD.
3. If the current setting shown is not the one for your
region, arrow across to the Region Profile LCD. The
question mark represents the question "Is this the region
you want?" If B5 is the one you want, press Enter; if it's
not the one you want, arrow across until you see the code
you desire. See the list of Region Codes on the back of
this card.
4.When you reach the region code you want, press
Enter. After pressing Enter, you will see the message
Option Set
.
5. After setting the region profile, you can re-power the
modem or use the arrows to move back and up the menu
tree to return to the Status LCD.
Region Setting
Current Setting
Options
Region Profile Region Profile
99? 01?
Region Profile Region Profile
03? 04?
Region Profile Region Profile
09? 6C?
Chapter 3 – Using the Front Panel
Region Profile
B5?
Region Profile
02?
Region Profile
00?
Region Profile
9F?
21