Compatibility Commands - Multitech SocketModem MT5600SMI-32 Developer's Manual

Compatibility Commands

Command: &L
Description:
Defined Values:
Result Codes:
Command: )M
Description:
Defined Values:
Result Codes:
Command: @M
Description:
Defined Values:
Result Codes:
Command: :E
Description:
Defined Values:
Result Codes:
Multi-Tech Systems, Inc. SocketModem MT5600SMI Developer's Guide
Chapter 5 – AT Commands, S-Registers, and Result Codes
Leased Line Operation
Requests leased line or dial-up operation. This command is provided for
compatibility only; no mode change is performed, dial-up operation
continues. The OK response is returned for a valid parameter, but no other
action is performed. The parameter value, if valid, is written to S27 bit 2.
&L0 Requests dial-up operation. Dial-up operation continues.
OK
ERROR
Enable Cellular Power Level Adjustment
This command is included for compatibility only and has no effect other
than returning a result code.
)M0
)M1
)M2
OK
ERROR
Initial Cellular Power Level Setting
This command is included for compatibility only and has no effect other than
returning a result code.
@M0
@M30
OK.
ERROR
Compromise Equalizer Enable Command
This command is included for compatibility only and has no effect other than
returning a result code.
:E0
:E1
OK
ERROR
70