I Special 1 Menu Setting (Special 1) - Panasonic WV-CS850B Operating Instructions Manual

I Special 1 Menu Setting
(SPECIAL 1)
G Privacy Zone (PRIVACY ZONE)
Up to 8 unwanted zones can be masked on the moni-
tor screen.
1. Move the cursor to PRIVACY ZONE and select ON
or OFF with the joystick. Press the CAM (SET) key
to display the ZONE NUMBER setting menu.
** SPECIAL 1 **
PRIVACY ZONE
PROPO.P/T
AREA TITLE
PATROL
ALARM IN/OUT
CLEANING
EL-ZOOM
PRESET ALM
IMAGE HOLD
TILT ANGLE
RET
** ZONE NUMBER 1*/8 **
RET
ON: Preset privacy zones are veiled on the monitor
screen.
OFF: The veiling function does not work.
2. Select a zone number with the joystick, and press
the CAM (SET) key.
• A zone number followed by * (asterisk) indicates
that the zone has already been registered.
** ZONE NUMBER 1*/8 **
PAN/TILT
ZOOM/FOCUS
ZONE SCALE
SET DEL
RET
• When a zone number having no * is selected, the
picture is zoomed out fully.
• When a registered zone number is selected, the
camera moves to the preset position. Note that if
you move PAN/TILT, ZOOM/FOCUS or ZONE
SCALE in that position, the registered zone number
having "*" is cancelled.
• The zone frame appears in the centre of the screen
if 3 or fewer mask areas exist in that picture and if
the zone number is not registered yet.
OFF
ON
ON(USER)
STOP
OFF
ON
OFF
OFF
0°
→PUSH SET
→PUSH SET
••••|••••
L H
• The privacy zone may appear on the monitor
screen depending on the direction of the camera.
• The privacy zone function will not work at start-up
immediately after turning the power on.
3. To register a new zone
3-1 For PAN/TILT, move the cursor to PUSH SET
and press the CAM (SET) key.
** ZONE NUMBER 3*/8 **
PAN/TILT
ZOOM/FOCUS
ZONE SCALE
SET DEL
RET
3-2 Adjust the pan and tilt position so that the
desired position comes into the zone frame with
the joystick.
** ZONE NUMBER 3*/8 **
PAN/TILT
ZOOM/FOCUS
ZONE SCALE
SET DEL
RET
3-3 For ZOOM/FOCUS, move the cursor to PUSH
SET , and press the CAM (SET) key.
** ZONE NUMBER 3*/8 **
PAN/TILT
ZOOM/FOCUS
ZONE SCALE
SET DEL
RET
3-4 Adjust zoom and focus, and press the CAM
(SET) key.
Zoom can be adjusted within the range of 1 to
10 magnifications.
3-5 Move the cursor to ZONE SCALE, and move the
joystick to the right or left to adjust the zone
frame. Press the CAM (SET) key after the adjust-
ment.
-25-
→PUSH SET
→PUSH SET
••••|••••
L H
→PUSH SET
→PUSH SET
U TILT D/L PAN R
••••|••••
L H
→PUSH SET
→PUSH SET
U ZOOM D/L FOCUS R
••••|••••
L H