Connecting Optional Devices - ECS A790GXM-A Manual

Connecting Optional Devices

Refer to the following for information on connecting the motherboard's optional
devices:
SATA1~6: Serial ATA connectors
These connectors are used to support the new Serial ATA devices for the highest data
transfer rates (3.0 Gb/s), simpler disk drive cabling and easier PC assembly. It elimi-
nates limitations of the current Parallel ATA interface. But maintains register com-
patibility and software compatibility with Parallel ATA.
Pin Signal Name
1
Ground
3
TX-
5
RX-
7
Ground
Installing the Motherboard
Pin Signal Name
2
TX+
4
Ground
6
RX+
-
-
19