Operation - Husky H150PL Operator's Manual

INSTALLING THE AIR FILTER
See Figure 3.
 Remove label and plastic plug to install air filter before
starting air compressor.
 Insert the air filter unit into the air filter slot.
 Turn the air filter unit clockwise to tighten.
reMoVe laBel and PlaStiC PluG to inStall
air Filter BeFore StartinG air CoMPreSSor
WARNING:
Do not allow familiarity with products to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING:
Always wear safety goggles or safety glasses with side
shields when operating power tools. Failure to do so
could result in objects being thrown into your eyes
resulting in possible serious injury.
ASSEMBLY
air
Filter Slot
air Filter
Fig. 3

OPERATION

ATTACHING HOSE
See Figure 4.
 Make sure the air compressor is off and unplugged.
 Rotate pressure regulator knob fully counterclockwise.
 Insert hose adapter end of air hose into female coupler
end in air compressor.
HoSe adaPter
end
PreSSure
reGulator KnoB
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
CAUTION:
Do not use in an environment that is dusty or otherwise
contaminated. Using the air compressor in this type of
environment may cause damage to the unit.
1
FeMale CouPler
oFF
Fig. 4