The Reset Button; Getting Started - Oregon Scientific RMR183 User Manual

HOW TO USE THE TABLE STAND
OR WALL MOUNTING
The main unit has a removable table stand, which when installed,
can support the unit on a flat surface. Or you can remove the stand
and mount the unit on a wall using the recessed screw hole.
As for the remote unit, it comes with a wall-mount holder and a
removable stand. Use either to hold the unit in place.
Main unit
Wall-mount
Remote unit
Wall-mount
Table Stand
Table Stand

THE RESET BUTTON

This button is only used when the unit is operating in an unfavor-
able way or malfunctioning. Use a blunt stylus to hold down the
button. All settings will return to their default values.

GETTING STARTED

Once batteries are in place for the remote units, they will start
transmitting temperature readings at 30 second intervals.
The main unit will also start searching for signals for about a
minute once batteries are installed. Upon successful reception,
the individual channel temperatures will be displayed on the top
line and the indoor temperature on the second line. The main unit
will automatically update its readings at about 30-second inter-
vals.
If no signals are received, blanks "----" will be displayed and the
kinetic wave icon will show "
[MEMORY] simultaneously to enforce another search for about
30 seconds. This is useful in synchronizing the transmission and
reception of the remote and main units.
Repeat this step whenever you find discrepancies between the
reading shown on the main unit and that on the corresponding
remote unit.
5
". Press [CHANNEL] and