Dehumidify - Robertshaw 9801i2 User Manual

DEHUMIDIFY

Main Menu
Time & Day
Humidify
Dehumidify
Comfort Settings
Select
Back
Dehumidify Menu
Mode
Dehumidify Above
Select
Back
Dehumidify Menu
Mode Independent...
Over Cooling
Dehumidify Above
Select
Back
Select Dehumidify Mode
With Cooling
Independent Of Cooling
Add-on
Cancel Accept
Choose Dehumidify from the Main Menu.
The three items available in this menu are explained below.
Mode choices are:
Off
Off – Humidity level will not be controlled through the thermostat.
50%
With Cooling – Dehumidification will occur only during a cooling cycle and when the indoor
humidity level rises 2% above the humidity setpoint.
Independent Of Cooling – Dehumidification will occur when the measured humidity level rises
2% above the humidity setpoint regardless of a call for cooling.
NOTE: If Mode is set to Independent of Cooling, Over Cooling will be an option on the
Dehumidify Menu.
1.5°F
Over Cooling – To achieve more dehumidification, the thermostat will allow cooling beyond the
50%
temperature setpoint by the entered amount. Range 0.5°F to 2.0°F.
Dehumidify Above – This is where you set your preference of the humidity level. The range is
45% to 60%.
Add-on – Cycles the dehumidifier regardless of a call for cooling. In order to get full use of
this mode, it should only be selected when a duct mounted dehumidifier is installed.
NOTE: When dehumidification is active, the main screen will
include the icon next to the measured humidity.
16
9:15 Monday Jun 20
AM
68
°F
.9
Set At 70
Outside 42 55%RH
Menu
Mode