Enable Mld_Snooping; Disable Mld_Snooping - D-Link DGS-1100-16/ME Reference Manual

Command
static_group
Each command is listed in detail, as follows:

enable mld_snooping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the MLD snooping:

disable mld_snooping

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the MLD snooping:
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameter
To enable MLD snooping on the Switch.
enable mld snooping
The enable mld snooping command enables MLD snooping on the
Switch.
If IGMP snooping is also enabled, this operation may possibly fail
due to the total number of group entrys exceeding the limitation of
group table.
None.
Only administrator-level users can issue this command.
DGS-1100-24P/ME:admin#enable mld_snooping
Command : enable mld_snooping
Success.
DGS-1100-24P/ME:admin#
To disable MLD snooping on the Switch.
disable mld snooping
The disable mld snooping command disables MLD snooping on
the Switch. Disabling MLD snooping allows all MLD and IP multicast
traffic to flood within a given IP interface.
None.
Only administrator-level users can issue this command.
DGS-1100-24P/ME:admin#disable mld_snooping
Command : disable mld_snooping
Success.
DGS-1100-24P/ME:admin#
103