Sony BDV-N9100W Operating Instructions Manual page 61

• [4K Output]
[Autol]: Outputs 2K (1920 x 1080) video
signals during video playback and 4K
video signals during photo play when
connecting to a Sony 4K-compatible
equipment.
Outputs 4K video signals during playback
of 24p video contents in BD/DVD ROMs
or photo play when connecting to a non-
Sony 4K-compatible equipment.
This setting does not work for 3D video
image playback.
[Auto2]: Automatically outputs 4K/24p
video signals when you connect a 4K/24p -
compatible equipment and make the
appropriate settings in [BD-ROM 24p
Output] or [DVD-ROM 24p Output], and
also outputs 4K/24p photo images when
you play 2D photo files.
[Off]: Turns off the function.
If your Sony equipment is not detected when
[Auto 1] is selected, the setting will have the same
el'fbct as [Auto2] setting.
• [YCbCr/RGB (HDMI)]
[Auto]: Automatically detects the type of
external equipment, and switches to the
matching color setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2
video signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4
video signals.
[RGB]: Select this when connecting to an
equipment with an HDCP compliant DVI
jack.
• [HDMI Deep Color Output]
[Auto]: Normally select this.
[ 16bit], [12bit], [10bit]: Outputs 16bit/
12bit/10bit video signals when the
connected TV is compatible with Deep
Color.
[Off]: Select this when the picture is
unstable or colors appear unnatural.
• [SBM] (Super Bit Mapping)
[On]: Smooths the gradation of video
signals output from the HDM[ (OUT)jack.
[Off]: Select this when outputting distorted
video signals or unnatural color.
• [Pause Mode] (BD/DVD VIDEO/
DVD-R/DVD-RW only)
[Auto]: The picture, including subjects that
move dynamically, is output with no jitter.
Normally select this position.
[Frame]: The picture, including subjects
that do not move dynamically, is output in
high resolution.
[Audio Settings]
• [BD Audio MIX Setting]
[On]: Outputs the audio obtained by mixing
the interactive audio and secondary audio
to the primary audio.
[Offl: Outputs the primary audio only.
• [Audio DRC]
You can compress the dynamic range of the
sound track.
[Auto]: Performs playback at the dynamic
range specified by the disc (BD-ROM
only).
[On]: The system reproduces the sound
track with the kind of dynamic range that
the recording engineer intended.
[Offl: No compression of dynamic range.
tci
€-
3
61us