Sony BDV-N9100W Operating Instructions Manual page 57

Further Settings for the
Wireless System
[Secure Link]
You call specify the wireless connection to
link the main unit to the surround amplifier
using the Secure Link function,
This function call help prevent interference
if you use multiple wireless products or
your neighbors use wireless products,
1
Press HOME.
The home menu appears on the TV
screen.
2
Press
*/*
to select _ [Setup].
3 Press 4,/# to select [System
Settings], then press _.
4
Press 4,/# to select [Wireless
Sound Connection], then press
The [Wireless Sound Connection]
display appears.
5 Press 4,/_ to select [Secure
Link], then press [_.
6
Press 4'/,1" to select [On], then
press
_.
7 Press SECURE LINK on the rear
of the surround amplifier.
Proceed to the next Step within a few'
minutes.
8
Press ./. to select [Start], then
press.
To return to the previous display,
select [Cancel].
9
After the message [Secure Link
setting is complete.] appears,
press _.
The surround amplifier is linked to the
main unit and the LINK/STANDBY
indicator turns orange.
[f the message [Cannot set Secure
Link.] appears, follow' the on-screen
messages.
To cancel the Secure Link
function
For the main unit 0
:3"
Select [Off] on Step 6 above.
For the surround amplifier -o 0
Hold down SECURE LINK on the rear of
¢
the surround amplifier until the LINK/ _.
STANDBY indicator turns green or flashes
=
green.
57 us