Sony BDV-N9100W Operating Instructions Manual page 27

Rear of the main unit
k_
FM wire antenna (aerial)
(supplied)
Step 3: Preparing for
Network Connection
To connect the system to your network, perform
[Easy Network Settings]. For details, see "Step 5:
Performing the Easy Setup" (page 31 ).
Select the method based on your LAN
(Local Area Network) environment.
• If you use a wireless LAN
The system has built-in Wi-Fi, and you
call connect the system to the network by
making the network settings.
• If you use other than a wireless LAN
Use a LAN cable to connect to the LAN
(100) terminal on the main unit.
• Be sure to lully extend the FM wire antenna
(aerial).
• After connecting the FM wire antenna (aerial),
keep it as horizontal as possible.
If you have poor FM reception, use a 75-ohm
coaxial cable (not supplied) to connect the main
unit to an outdoor FM antenna (aerial).
l
Broadband router
LAN cable (not supplied)
A shielded interface cable (LAN cable),
straight or crossover, is recommended.
27 us