Sony BDV-N9100W Operating Instructions Manual page 29

Step 4: Setting up the
Wireless System
The main unit transmits sound to the
surround amplifier that is connected to the
surround speakers. To activate wireless
transmission, perform the following Steps.
4
| Insert the wireless transceiver
into the main unit.
Rear panel of the main unit
2
Wireless transceiver
Insert the wireless transceiver
into the surround amplifier.
Rearpanel o f thesurroundamplifier
3
4
Connect the AC power cord
(mains lead) of the main unit.
Before connecting the AC power cord,
make sure all connections in "Step 2:
Connecting the System" (page 22) are
secure.
Press I/@ to turn on the system.
5
Connect the AC power cord
(mains lead) of the surround
amplifier.
LINK/STANDBY indicator
When wireless transmission is
activated, the LINK/STANDBY
indicator turns green.
If the LINK/STANDBY indicator does
not turn on, see "Wireless sound"
(page 72).
Wireless transceiver
29us