Troubleshooting; Information Codes - Samsung BF3O Series User Manual

TROUBLEShOOTING

PROBLEM
What should I do if the oven
doesn't heat up?
What should I do if the oven
doesn't heat up even after the
function and temperature have
been set?
What should I do if an error
code appears and the oven
does not heat up?
What should I do if the time
display is blinking?
What should I do if the oven
light doesn't illuminate?
What should I do if the oven's
fan is running without having
been set?

INFORMATION CODES

CODE PROBLEM
An error of the oven may cause low
E-**
1)
performance and problems in safety.
-SE-
Stop using the oven immediately.
SAFETY SHUTOFF
S-01
Oven has continued operating at set
temperature for prolonged time.
If you did not select an appropriate
- - - -
temperature for the mode.
1) * refers to all numbers or characters.
12_installation & maintenance
BF3ON3T011_XFA_DG68-00447A_EN.indd 12
SOLUTION
• The oven may not be switched on. Switch the oven on.
• The clock may not be set. Set the clock.
• Check to see if the required settings have been applied.
• A household fuse may have blown or a circuit breaker
may has tripped. Replace the fuses or reset the circuit.
If this happens repeatedly, call an electrician.
• There may be problems with the internal electrical
connections. Call your local service centre.
• There is a fault in the internal electrical circuit
connection. Call your local service centre.
• There has been a power failure. Set the clock.
• The oven light is faulty. Call your local service centre.
• After use, the oven's fan runs until the oven has cooled
down. Call your local service centre if the fan continues
to run after the oven has cooled down.
SOLUTION
Call local SAMSUNG service centre.
Turn oven off and remove food. Allow
oven to cool before using again.
Select the correct temperature for the
mode. (see section "Using the Fast
Preheating mode")
10/04/2012 17:59:51