Table of Contents
Advertisement
Shooting automatically with a fi xed interval (i time lapse shooting)
You can set the camera to shoot automatically with a set time lapse. The shot frames can
also be recorded as into a single movie. This setting is only available in P/A/S/M modes.
1
Select [j/Y/i] in W Shooting Menu 1 and press
Q.
2
Select [Intrvl. Sh./Time Lapse] and press I.
3
Select [On], press I and make the following settings.
Number of Frames
Start Waiting Time
Interval Length
Time Lapse Movie
Movie Settings
4
Shoot.
• Frames are shot even if the image is not in focus after AF. If you wish to fi x the focus
position, shoot in MF.
• [Rec View] operates for 0.5 seconds.
• If either of the time before shooting, or shooting interval is set to 1 minute 31 seconds
or longer, the monitor and camera power will turn off after 1 minute. 10 seconds before
shooting, the power will automatically turn on again. When the monitor is off, press the
shutter button to turn it on again.
• If the AF mode is set to [C-AF] or [C-AF+TR], it is automatically changed to [S-AF].
• Touch operations are disabled during time lapse shooting.
• Cannot be used with HDR photography.
• It is not possible to combine time lapse shooting with bracketing, multiple exposure, and
bulb, time or composite photography.
• The fl ash will not work if the fl ash charging time is longer than the interval between shots.
• If the camera automatically turns off in interval between shots, it will turn on in time for the
next shot.
• If the any of the still pictures are not recorded correctly, the time lapse movie will not be
generated.
• If there is insuffi cient space on the card, the time lapse movie will not be recorded.
• HDMI output is not available with movies shot with [4K] selected for [Movie Settings] >
[Movie Resolution].
Sets the number of frames to be shot.
Sets waiting time before starting to shot.
Sets interval between shots after shooting starts.
Sets recording format of frame sequence.
[Off]: Records each frame as a still picture.
[On]: Records each frame as a still picture and generates and
records a single movie from the frame sequence.
[Movie Resolution] : Choose a size for time lapse movies.
[Frame Rate] : Choose a frame rate for time lapse movies.
Shooting Menu 1
Card Setup
Card Setup
1
Reset/Assign Custom Modes
2
Picture Mode
D
Image Aspect
Digital Tele-converter
j/Y /
Back
Set
j
4:3
Off
4
EN
91
Advertisement
Table of Contents
