Attaching a lens to the camera
1
Remove the rear cap of the
lens and the body cap of the
camera.
2
Align the lens attachment mark
(red) on the camera with the
alignment mark (red) on the
lens, then insert the lens into
the camera's body.
3
Rotate the lens clockwise
until you hear it click (direction
indicated by arrow 3 ).
• Make sure the camera is turned off when attaching or removing the lens.
• Do not press the lens release button.
• Do not touch internal portions of the camera.
Remove the lens cap
Removing the lens from the camera
Make sure the camera is turned off when removing the
lens.While pressing the lens release button, rotate the
lens in the direction of the arrow.
Interchangeable lenses
Read "Interchangeable lenses" (P. 146) .
1
1
2
1
2
1
Rear cap
1
2
Lens attachment mark
3
1
Lens release button
2
1
2
1
EN
15