Regular Cleaning, Maintenance And Lubrication - Revo R322 Original Instructions Manual

MAINTENANCE - GENERAL
To keep this machine in a safe working condition regular certain maintenance is
required.
1. The gib strip on the dovetail slide must be adjusted to eliminate any free play.
2. The dovetail slides will need to be lubricated will oil periodically.
3. The magnetic base should be inspected for damage on its magnetic surface or for
any damage to the resin, any damage should be repaired before using the drill.
4. A monthly inspection of the carbon brushes is recommended, excessive wear could
lead to motor damage or malfunction.
MAINTENANCE - REPLACING BRUSHES
The carbon brushes (M) can be removed by
simply unscrewing the brush cap (L).
The brush has a spring and metal cap
attached, simply withdraw the brush to
inspect or replace it.
When replacing the brush, slide it into the
brush holder, make sure the metal cap of
the brush seats in the recess on the brush
cap, then screw the brush cap home.
Always use genuine replacement parts.
The brushes on this drill unit have an auto
stop feature, when the brush reaches its
wear limit to motor will stop until the brushes
are replaced
ACCESSORIES
18Y170
CHUCK ADAPTOR
This allows a drill
chuck to be quickly
placed into the arbor
of the machine.
18YPIPE PIPE CLAMP
This allows the drill to be mounted
on a pipe or cylindrical object, the
magnet attaches to the "saddle" so
the material of the workpiece does
not need to be magnetic.
21
M
L
R322 DRILL - W18XC473 - Revised 231111