Shifting The Display; Chart Scale; Chart Cards; Chart Card Overview - Furuno 1824C-BB Operator's Manual

3.3

Shifting the Display

The plotter display can be shifted as below.
1. Use the Trackball to locate the cursor at a screen edge. The screen shifts in the
direction opposite of cursor location.
2. To turn off the cursor, press the C: CENTER soft key. This also returns the own ship
marker to the screen center.
3.4

Chart Scale

Chart scale (range) may be selected with the [RANGE -] or [RANGE +] key. The
[-] key shrinks the chart range (image is expanded); the [+] key expands the cart
range (image is shrunk). The available ranges are as below.
nm 0.125 0.25 0.5
km 0.23 0.46 0.93
sm 0.144 0.29 0.58
*: 2046 or 2047 in high latitude
3.5

Chart Cards

3.5.1 Chart card overview

Your system reads Navionics GOLD charts
or C-MAP NT MAX charts, depending on
the type of processor unit you have.
When you insert a suitable chart card in
the slot and own ship is near any
cartographic object, a chart appears. If a
wrong card is inserted or a wrong chart
scale is selected, landmasses will appear
hollow. Chart icons appear at the top of the
display to help you select a suitable chart
scale. The table below shows the chart
icons and their meanings.
1 2 4 8
1.85 3.70 7.41 14.8
1.15 2.30 4.60 9.21
Charts scales
16 32 64 128
29.6 59.3 119 237
18.4 36.8 73.7 147
Icon Meaning
Proper card is not inserted or
chart scale is too small. Press
the ZOOM IN soft key to adjust
chart scale.
Chart scale is too large.
Operate the RANGE key to
adjust chart scale.
Suitable chart scale is
selected.
Chart icons and their meanings
3. PLOTTER OPERATION
256 512 1024
474 948 1896
295 589 1178
*
2048
3792
2356
3-9