Furuno 1824C-BB Operator's Manual page 18

1.5.2 Selecting a display
1. Press the DISP key to show the display screen selection window. The icons of modes
not available are shaded. HOTPAGE 1-HOTPAGE 6 are user-arrangeable displays
called "hot pages," which you can configure as you like. For further details, see the
paragraph "7.6 Hot Page Setup."
Selected
item
RADAR
HOTPAGE 1 HOTPAGE 2
· TURN KNOB TO SELECT MODE
· PUSH ANY SOFT KEY TO
Note: "WX FAX" is available only when the facsimile receiver FAX-30 is connected. If
the message "AUX SOURCE IS DISCONNECTED. PUSH ENT KNOB TO EXIT."
appears, press the ENTER knob and select other item.
2. Rotate the ENTER knob to select a basic display screen or a hot page screen.
3. Push the ENTER knob.
4. If you select a basic display screen, a group of appropriate combination displays appear.
In the example below, the radar combination screens are shown. When WX FAX is
selected at step 2, a combination display does not appear.
PUSH ENTER KNOB.
5. Rotate the ENTER knob to select display desired.
6. Push the ENTER knob to finish.
PLOTTER SOUNDER NAV DATA OVERLAY EXT VIDEO
HOTPAGE 3 HOTPAGE 4
AND PUSH KNOB TO ENTER.
SELECT IMAGE SOURCE.
Display screen selection window
Radar combination screen selection window
1. OPERATIONAL OVERVIEW
WX FAX
HOTPAGE 5 HOTPAGE 6
RETURN
Basic display
screens
Hot pages
1-7