Furuno 1824C-BB Operator's Manual page 117

3. PLOTTER OPERATION
Alarm messages
The table below shows the plotter alarm messages and their meanings.
ARRIVED AT WAYPOINT XXX! (XXX = waypoint name)
ENTERED INTO AVOIDANCE AREA!
EXCEEDED ANCHOR WATCH LIMIT!
EXCEEDED XTE LIMIT!
SPEED ALARM!
TEMPERATURE ALARM!
TRIP ALARM! MILEAGE EXCEEDED
GROUNDING ALARM
GUARDIAN ALARM (DEPTH AREA)
GUARDIAN ALARM (LAND AREA)
GUARDIAN ALARM (INTERTIDAL AREA)
GUARDIAN ALARM (ROCK)
GUARDIAN ALARM (SHORELINE CONSTRUCT)
GUARDIAN ALARM (OBSTRUCTION)
GUARDIAN ALARM (NO DATA AVAILABLE)
3-54
Plotter alarm messages and their meanings.
Message Meaning
Arrival alarm violated.
Proximity alarm violated.
Anchor watch alarm violated.
XTE alarm violated.
Speed alarm violated.
Water temperature alarm violated.
Trip alarm violated.
Grounding alarm (C=MAP
specification) violated. See next
paragraph.
Depth area (C=MAP specification)
violated. See next paragraph.
Land area (C=MAP specification)
violated. See next paragraph.
Intertidal area (C=MAP specification)
violated. See next paragraph.
Rock alarm (C=MAP specification)
violated. See next paragraph.
Shoreline construct (C=MAP
specification) violated. See next
paragraph.
Obstruction (C=MAP specification)
violated. See next paragraph.
No data alarm (C=MAP specification)
violated. See next paragraph.