Table of Contents
Advertisement
The Firmware Upgrade Utility
Rack Mounting
The CS-1708 / CS-1716 can be mounted in a 1U system rack. For convenience
and flexibility, the mounting brackets can screw into either the front or the back
of the unit so that it can attach to the front or the back of the rack. To rack mount
the unit do the following:
1. Screw the mounting brackets into the sides of the unit at the front or the
rear, as shown in the diagram below.
2. Slide the unit into the rack and secure it to the rack.
47.
2004-04-27
Advertisement
Table of Contents
