Table of Contents
Advertisement
F5 SKP:
Skip (SKP) Mode enables you to easily skip backward or forward - switching the
console focus from the currently active computer port to the previous or next
available one.
w
The selection of computers to be available for Skip Mode switching is made
with the Scan/Skip Mode setting under the F3 SET function (see p. 28).
w
When you are in Skip Mode, press [ ← ] to switch to the previous computer
in the List; press [ → ] to switch to the next computer in the List; press [ ↑ ]
to switch to the last computer on the previous station in the List; press [ ↓ ]
to switch to the first computer on the next station in the List.
Note: When you Skip, you only Skip to the previous or next available
computer that is in the Scan/Skip Mode selection (see p. 28).
w
If a Port has been selected for Scan/Skip Mode, when the focus switches to
that port a Left/Right Triangle symbol appears before its Port ID Display to
indicate so.
w
While Skip Mode is in effect, the console will not function. You must exit
Skip Mode in order to regain control of the console.
w
To exit Skip Mode, press the [Spacebar] or Esc.
2004-04-27
OSD Operation
33.
Advertisement
Table of Contents
