Video Adjustment - Video Adjustment Page - AMX NXD-1200V Operation/Reference Manual

Firmware Pages and Descriptions

Video Adjustment - Video Adjustment Page

The Video Adjustment page (FIG. 89) (accessed by pressing the Video Adjustment button on the Setup page and then
selecting the appropriate button from the option bar) sets the Video properties of the incoming video signal from an
NXA-AVB/RGB Breakout Box.
FIG. 89
Video Adjustment page (showing default values)
The elements of the Video Adjustment page are described in the table below:
Video Adjustment Page Elements
Back:
Connection Status icon: This visual display of the connection status allows the user to have a current visual update of
Settings:
Video Settings:
Status:
Format:
Brightness:
Contrast:
Saturation:
Hue:
88
Saves the changes and returns you to the previously active touch panel page.
the panel's connection status regardless of what page is currently active.
• A Lock only appears on the icon if the panel has established a connection with a currently
secured target Master (requiring a username and password).
• The Default Settings button sets the video settings to their default values (indicated in
this table).
• The Undo Changes button disregards any changes made on the page since the last
settings were saved.
• The Save Settings button saves any changes made to this page.
• The Black & White button toggles the Black & White display mode. Default = Off.
• The Sharpness button toggles the Interpolate (Sharpness) feature. Default = On.
• The Interlace button toggles the Interlacing feature. Default = On.
Displays whether or not a video-sync signal is detected.
Allows you to press this blue field and cycle through a choice of available video formats (NTSC,
PAL, SECAM, or Auto detect).
• Default = Auto.
Use the UP/DN buttons to alter the brightness level of the incoming signal.
• Range = 0 - 255, default = 128.
Use the UP/DN buttons to alter the contrast level of the incoming signal.
• Range = 0 - 255, default = 128.
Use the UP/DN buttons to alter the color saturation level of the incoming signal.
• Range = 0 - 255, default = 128.
Use the UP/DN buttons to alter the hue level of the incoming signal.
• Range = 0 - 255, default = 128.
Incoming Video signal
Once done making your screen
adjustments, SAVE SETTINGS.
NXD/T-1200V Wall/Flush Mount Touch Panel