AMX NXD-1200V Operation/Reference Manual page 102

Firmware Pages and Descriptions
Battery Base Page Elements (Cont.)
Battery Status fields:
Battery Power Brightness
Limit:
The term "quality" (in the context of a battery), refers to the current capacity relative to
the batteries' rated capacity. For example, after constant use, a battery may be
operating at 75% of its rated capacity even though it might be fully charged. In this
case, the battery could be incorrectly reporting its' information back to the battery
base and then consequently relating this information back to the Battery Base page.
A battery can be recalibrated using an optional NXT-CHG (battery charger).
90
This section provides the ability to monitor the current battery charge levels and charge
qualities:
• The Combined Charge Status bargraph indicates the combined power charge
available from both internal battery connection slots (bargraph range = 0 - 100).
• The Battery One Charge Status bargraph indicates the power charge available on the
Slot 1 internal battery connection (bargraph range = 0 - 100).
• The Battery One Quality bargraph indicates the physical capacity (quality) of the
battery. Quality is the percentage of actual capacity vs. its rated capacity.
For optimal performance, a battery should be replaced when the quality rating
drops below 80%.
• The Battery Two Charge Status bargraph indicates the power charge available on the
Slot 2 internal battery connection (range = 0 - 100).
• The Battery Two Quality bargraph indicates the physical capacity (quality) of the
battery. Quality is the percentage of actual capacity vs. its rated capacity.
• The Base Version field indicates the firmware version being used by the
NXA-BASE/B Battery Base connected to the NXT Modero panel.
• The Battery Level Port field indicates the port being used to report the combined
charge status level back to the NetLinx Master on (set in TPD4).
• The Battery Level field indicates the level being used to report the combined charge
status level back to the NetLinx Master on (set in TPD4).
The DISABLE/DISABLED button acts as a power save feature with two available choices:
• Disable - activates the brightness limit set on the Modero panel and is used to
conserve battery power. Activating this feature causes the panel to function at 80% of
full brightness and overrides the Panel Brightness value set on the Setup page. This
extends the battery usage time.
• Disabled - (illuminated when selected) deactivates this power save feature and makes
the panel use the specified Panel Brightness level set on the Setup page.
NXD/T-1200V Wall/Flush Mount Touch Panel