Bct; Bdo; Bfb - AMX MIO-R4 Instruction Manual

Button Commands (Cont.)

^BCT

Set the text color to the specified color only if the specified text color is not the same as the current color.
Note: Color can be assigned by color name (without spaces), number or R,G,B value (RRGGBB or RRGGBBAA).
Syntax:
"'^BCT-<vt addr range>,<button states range>,<color value>'"
Variable:
• variable text address range = 1 - 4000.
• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
• color value = Refer to RGB Values for all 88 Basic Colors on page 58 for more information.
Example:
SEND_COMMAND Device,"'^BCT-500.504&510,1,12'"
?BCT Get the current text color.
Syntax:
SEND_COMMAND <DEV>,"'?BCT-<vt addr range>,<button states range>'"
Variables:
• variable text address range = 1 - 4000.
• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
• custom event type = 1013:
Example:
SEND COMMAND Device,"'?BCT-529,1'"
Gets the button 'OFF state' text color information.
The result sent to the Master would be:

^BDO

Set the button draw order
Syntax:
"'^BDO-<vt addr range>,<button states range>,<1-5><1-5><1-5><1-5><1-5>'"
Variable:
• variable text address range = 1 - 4000.
• button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).
• layer assignments = Fill Layer
Example:
SEND_COMMAND Device,"'^BDO-530,1&2,51432'"
Sets the button's variable text 530 ON/OFF state draw order (from bottom to top) to Border, Fill, Text, Icon, and Image.
Example 2:
SEND_COMMAND Device,"'^BDO-1,0,12345'"

^BFB

Set the feedback type of the button. ONLY works on General-type buttons.
Syntax:
"'^BFB-<vt addr range>,<feedback type>'"
Variables:
• variable text address range = 1 - 4000.
• feedback type = (None, Channel, Invert, On (Always on), Momentary, and Blink).
Example:
SEND_COMMAND Remote,"'^BFB-500,Momentary'"
Mio Modero R-4 Remote - Instruction Manual
Sets the Off state border color to 12 (Yellow). Colors can be set by Color Numbers, Color name, R,G,B,alpha colors
(RRGGBBAA) and R, G & B colors values (RRGGBB).
Flag - Zero
Value1 - Button state number
Value2 - Actual length of string (should be 9)
Value3 - Zero
Text - Hex encoded color value (ex: #000000FF)
Text length - Color name length (should be 9)
ButtonGet Id = 529 Type = 1013
Flag = 0
VALUE1 = 1
VALUE2 = 9
VALUE3 = 0
TEXT = #FFFFFEFF
TEXT LENGTH = 9
Image Layer = 2
Icon Layer
Text Layer
Border Layer = 5
Note: The layer assignments are from bottom to top. The default draw order is 12345.
Sets all states of a button back to its default drawing order.
Sets the Feedback type of the button to 'Momentary'.
= 1
= 3
= 4
SEND_COMMANDs
36