Site Survey; Joining A Wireless Network; Zigbee Diagnostics - AMX MIO-R4 Instruction Manual

Site Survey

The Site Survey page (FIG. 19) is a report of the wireless networks found and the status of their availability to the device. The Site
Survey page is accessed by pressing the Network Scan button on the second System Settings page (page 22).
Site Survey page
FIG. 19
Site Survey
Extended PAN ID
Join
Stack Profile

Joining a Wireless Network

1. Select Protected Settings in the Setup Menu.
2. Select System Settings in the Protected Settings Menu.
3. Press the Network Scan button on the second page to open the Wireless Networks page. Pushing the Extended PAN ID header
sorts the available networks by Extended PAN ID in alphabetical order; pressing the header again will reverse the sorting.
4. Select the network by pushing it on the touch screen. A pop-up page reading "Do you wish to connect to PAN [PAN number]"
will appear.
To connect to the PAN, press the Yes button.

To return to the Site Survey page without connecting to the PAN, press the No button.

If you do not make a selection within three seconds, the pop-up page will automatically close in three seconds.

5. Select the Back button until you return to the Setup Menu.

ZigBee Diagnostics

The ZigBee Diagnostics page (FIG. 20) is a report of the wireless networks found and the status of their availability to the device.
This allows assessment of a network connection to the device while moving through a particular area, for instance. The ZigBee
Diagnostics page is accessed by pressing the ZigBee Diagnostics button on the second System Settings page (page 22)
ZigBee Diagnostics page
FIG. 20
RF Link Info
Parent ID:
Mio Modero R-4 Remote - Instruction Manual
The Personal Area Network ID.
The availability of the network. Yes indicates that it is open to join.
The Stack Profile indicates the capabilities of that wireless network.
The ID number of the ZigBee gateway currently being contacted by the device. Any number other than "0" (zero)
indicates that the network signal is going through a repeater.
Protected Settings Menu
24