XSMALL
1.1
Documentation required
The following documentation is needed for repair procedures:
•
Instruction booklet for specifi c model.
•
Technical documentation for specifi c model (diagrams, exploded drawings).
1.2
Tools and equipment required
As well as the standard equipment, the following is required:
Qty
Description
1
Screwdriver
1
Pliers for Oetiker clamps
1
CC -A - Vdc tester
1
Digital thermometer
1
SSC (Saeco Service Center)
1.3
Material
Description
Thermal paste
Descaler
Grease solvent
Silicone grease
1.4
Safety warnings
We recommend you consult the technical manual of the machine before performing any mainte-
nance work.
Observe all applicable standards relating to the repair of electrical appliances.
Always disconnect the power plug from the mains before beginning repair work.
Simply turning off the main machine power switch is not an adequate safety precaution.
This domestic appliance is rated as insulation class I.
On completion of the repair work, insulation and dielectric rigidity tests must be performed.
Saeco Int.
Notes
Torx T 10
Scale limit > 150°C
Programmer
Notes
Heat resistance > 200°C
Saeco Entkalker
Personal preference
Safe to use with food
Rev. 00 / Jul. 2008
01 INTRODUCTION
Page 1 / 4