ATEN MasterView CS-1774 User Manual page 34

CS-1772 / CS-1774 User Manual
4. After you have made your device selection(s), Click Next to perform the upgrade.
M If you enabled Check Firmware Version, the Utility compares the device's
firmware level with that of the upgrade files. If it finds that the device's version
is equal to, or higher than, the upgrade version, it brings up a dialog box
informing you of the situation and gives you the option to Continue or Cancel.
M If you didn't enable Check Firmware Version, the Utility installs the upgrade
files without checking whether they are a higher level, or not.
M As the Upgrade proceeds status messages appear in the Status Messages panel,
and the progress toward completion is shown on the Progress bar.
28
2005-03-16