Table of Contents
Advertisement
Invoking Hotkey Setting Mode
Hotkey Setting Mode is used to set up your CS-1772 / CS-1774 switch configuration.
All operations begin with invoking Hotkey Setting Mode (HSM). To invoke HSM do
the following:
1. Press and hold down the Num Lock key
2. Press and release the minus key
3. Release the Num Lock key
Note: There is an alternate key combination to invoke HSM. See below for details.
M
When HSM is active, the Caps Lock, and Scroll Lock LEDs flash in succession to
indicate that HSM is in effect. They stop flashing and revert to normal status when
you exit HSM.
M
Ordinary keyboard and mouse functions are suspended - only Hotkey compliant
keystrokes and mouse clicks (described in the sections that follow), can be input.
M
At the conclusion of some hotkey operations, you automatically exit hotkey mode.
With some operations, you must exit manually. To exit HSM manually, press the
Esc key, or the Spacebar.
Hotkey Setting Mode
2005-03-16
Chapter 4.
17
Advertisement
Table of Contents
