Easy Setting - Panasonic DMR-XW390 Operating Instructions Manual

Easy setting

1
Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
2
Press [Í] on the remote control or [Í/I] on
this unit.
• The Easy Setting will start at the initial
power on.
3
Follow the on-screen instructions and
perform the settings.
• When the Download from TV screen
appears, the setting information on the TV
is acquired by this unit. (
• When the Auto Setup screen appears, the
unit searches for the terrestrial digital
channels. It takes about 3 minutes.
Digital TV Auto Tuning
Scan
This will take about 3 minutes.
RF Ch
35
35
Digital TV: 2
RETURN
After tuning has been completed, clock will
be set automatically.
If the clock setting screen appears, set the
time manually (
Downloaded from www.Manualslib.com
62)
CH 21
Channel Name Type Quality
Digital TV 10
10
Digital TV
Radio: 0
Searching
78, Clock).
manuals search engine
4
Set "Power Save" to "On", "On Timer" or
"Off", then press [OK].
Power Save in Standby
Standby power consumption is reduced by disabling
Quick Start function.
Unit's Display is set to "Automatic".
Home Network (DLNA) function is not available in both standby
and power on modes
OK
RETURN
• On
It will go into the Power Save in Standby
mode.
• On Timer
Set the period of power save and then
press [OK].
• Power Save in Standby mode is activated
at the set time period.
• Off
69
It is possible to start quickly from the
standby mode. (Quick Start mode)
When "Easy Setting has been completed."
appears, Easy setting is complete.
To stop partway
Press [RETURN
To restart set up
1 Press [FUNCTION MENU]. (
2 Select "Setup" in "Others", then press [OK].
3 Select "Auto Setup" in "Digital TV Tuning",
then press [OK].
4 Select "Yes", then press [OK].
If the TV aspect setting screen appears
Refer to "TV Aspect". (
To confirm that channels have been tuned
correctly
Refer "Using Channel List". (
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
Getting started
Power Save
On
From To
0 6
].
16)
74)
20)
VQT4C72
17