Basic Midi Port Hookup; The Pedal Jacks - Kurzweil Forte Started Manual

Basic MIDI Port Hookup

To use the Forte as a MIDI controller for another sound module, use a MIDI cable to connect
the MIDI port marked "OUT" to the MIDI input port of the module that you want to control.
To control the Forte using another MIDI controller, use a MIDI cable to connect the MIDI
port marked "IN" to the MIDI output port of the controller that you will be using.
Using Forte MIDI Out
For other MIDI connection scenarios, please refer to the Forte User Manual.

The Pedal Jacks

Use the five pedal jacks to connect controller pedals to the Forte.
Although optional Kurzweil pedals are recommended, it is possible to use most switch or
controller pedals that adhere to the following specifications.
Switch Pedals
Continuous Control
(CC) Pedals
1/4 inch tip-sleeve (mono) plug
10-kOhm linear-taper potentiometer, 1/4 inch tip-ring-sleeve
(stereo) plug with the wiper connected to the tip.
The Rear Panel
Basic MIDI Port Hookup
Using Forte MIDI In
GS-5