Remote Coding / Programming Routine(S); Programming 2 Way 4 Button Remotes - Firstech Compustar RF-2W9000FM User Manual

Advanced System Functions
Anti Jacking Mode
Please see your place of purchase to activate this feature.
Your system has a mode that requires you to keep your remote separate from your key chain. This feature also requires additional labor. Please
consult your installer for more details. The Anti Jacking mode allows you to safely disable your vehicle once a thief has driven off with your property.
If you are car jacked and still have your remote, you can panic the system by holding button
seconds and the vehicle will shut down.
More Optional Sensors
If you purchased an Alarm or Alarm and Remote Start system you have the ability to add optional sensors from Firstech. You have the ability to
protect your investment by adding a battery back up system to protect main power to your alarm or a tilt sensor to protect expensive rims and tires.
By Firstech, LLC 34
FT-2WLCD-S-E_UserGuide.indd 35-36
Remote Coding / Programming Routine
IMPORTANT: Every Firstech remote must be coded to the system prior to performing any operations. All remotes must be coded at the same time.

Programming 2 Way 4 Button Remotes:

STEP 1: Activate Valet/Programming mode by manually turning the ignition key on and off (between the Acc & On positions) five times within 7
seconds. The vehicle's parking lights will flash once with the successful completion of this step.
down for 3.5 seconds. The siren will sound for 30
STEP 2: Within 2 seconds after cycling the ignition for the 5th time, tap the Lock button
remotes for a half second. The parking lights will flash once to confirm the transmitter has been coded.
on 2 way remotes or the (lock) button on 1 way
Exiting Programming:Programming is a timed sequence. The parking lights will flash twice signaling the end
of programming mode.
Programming Multiple Remotes: After the confirmation flash given in step 2, code additional remotes by
pressing Lock button on 2 way remotes or the (lock) button on 1 way remotes. The parking lights will flash
once confirming each additional remote. All systems can recognize up to three remotes.
35 By Firstech, LLC
2011-6-10 12:05:47