Clarion DB336MP Owner's Manual page 14

CD MP3 Mode Operations
Loading a Disc
Insert a CD into the center of the CD insertion
slot with the labeled side facing up. "LOAD"
appears in the display, the CD enters into the
slot and start playing.
Notes:
•
Do not put your hand, fingers, or foreign objects into
the CD insertion slot.
•
If a CD has already been loaded, another CD cannot
be inserted. Do not insert another one forcefully.
•
Discs not bearing the
with the unit. CD-ROMs cannot be played.
•
Some CDs recorded in CD-R/CD-RW mode may not
be usable.
Caution:
•
Single CD (3" (8 cm)), cannot be played with the unit.
Listening to the Disc already Inserted
Press the [FNC] button to select the CD mode,
the CD will start playing.
Stopping (pausing) Playback
While the CD playing pressing the [s] button
will stop the CD and "PAUSE" indicate.
Press the [s] button again to resume play-
back.
Ejecting the CD
Press the [Q] button, then the CD will be eject-
ed.
Note:
•
If the ejected CD is left as it is, it will be reloaded after
15 seconds.
Top Function
Press the [BND] button, then the CD will start
playing from the first song (track number 1).
14
DB336MP
mark cannot be played
Selecting Tracks (songs)
Press the [a][d] button.
d : Playback will start from the next track.
a : Playback will start from the beginning of
the track currently playing. When this
button is pressed again, the CD will play
from the previous track.
Fast-Forward and Fast-Backward
Press and hold the [a][d] button.
d : To fast-forward
a : To fast-backward
[a][d]
Pressing the
*
will move forward or backward 5 times faster than nor-
mal play, and pressing it for 3 seconds or longer will
do the operation 30 times faster.
Scan Play (Intro Music Scan)
Press the [SCN] button, then the display shows
"SCN", then the CD will play the first 10 seconds
of each track of the whole disc. Press the [SCN]
button again to disengage the unit from scan
play.
* A scan play will start from the track following the one
currently playing.
Repeat Play
Press the [RPT] button, then the display shows
"RPT", then the track currently playing will be
played repeatedly. Press the [RPT] button again
to disengage the unit from repeat play.
Random Play
Press the [RDM] button, then the display will
show "RDM", then the entire tracks on the disc
will be played at random. Press the [RDM] but-
ton again to disengage the unit from random
play.
button for 1 second or longer